| General
Requirements |
| 1.
Is the water from the mains supply
to be cooled for use as a food
additive? |
Yes
/ No |
| 2.
Is the chilling unit for internal
or external operation? |
Int
/ Ext |
| 3.
Do you require an AIR cooled
or WATER cooled unit? |
Air
/ Water |
| |
|
| Selection
Requirements |
| Please
advise at least three of the
first four, plus pump pressure
|
|
1.
Flow rate
2. Water supply temperature
3. Water return temperature
4. Heat to be removed (ie. Btu/hr,
kilocalorie, kilojoules, kilowatts)
5. Pump pressure required (ie.
psi or kPa or m) |
|
| |
|
| Alternatively
(Blow Moulding or Injection Moulding) |
|
1.
Type of material to be moulded
2. Total product throughput /
hour including any hot runners
or off-cuts etc.
3. Moulding temperature
4. Pump pressure required (ie.
psi, kPa or m) |
|
| |
|
| Cooling
of Mains Water (ie. Food Additive) |
|
1.
Flow rate
2. Water out temperature |
|
Industrial
/ Process Water Chillers